Resultats - Grup d'Investigació en Enginyeria Computacional i Experimental
Grup d'Investigació en Enginyeria Computacional i Experimental
| Tesis Doctorals Dirigides / Theses |
| 2021 | 2022 | 2023 | 2024 | 2025 |
|---|
| Títol: Thermo-mechanical characterization of acrylate/epoxy dual-curing resin systems for 3d printing applications |
| Autor: Escribá Flores, Armando Alfredo |
| Director: Fernández Francos, Xavier; Fabregat Sanjuan, Albert; Ferrando Piera, Francesc |
| Universitat: N/D |
| Any: 2025 |
| País: N/D |
| Títol: Mathematical Programming Applied in Energy System Optimization through Advanced Data-Driven and Co-Simulation Frameworks |
| Autor: Elomari, Youssef |
| Director: Marín Genescà, Marc; Jiménez Esteller, Laureano; Boer, Dieter-Thomas |
| Universitat: N/D |
| Any: 2024 |
| País: N/D |
| Títol: Obtaining sustainable fiber particles from waste lignocellulosic materials |
| Autor: Federica Vitrone |
| Director: Ramos Romero, Diego |
| Universitat: N/D |
| Any: 2023 |
| País: N/D |
| Títol: Politiouretanos termoestables vitriméricos con propiedades mejoradas de reciclabilidad |
| Autor: Guerrero Ruiz, Federico |
| Director: Cesteros Fernández, Yolanda; De La Flor Lopez, Silvia; Serra Albet, Maria Angels |
| Universitat: N/D |
| Any: 2023 |
| País: N/D |
| Títol: Progress in sustainability within the realm of designing new thermosetting materials |
| Autor: Roig Gibert, Adrià |
| Director: De La Flor Lopez, Silvia; Serra Albet, Maria Angels |
| Universitat: N/D |
| Any: 2023 |
| País: N/D |
| Títol: Sustainable and adhesive-free lignocellulosic fiberboards from steam exploded Arundo donax L |
| Autor: Vitrone, Federica |
| Director: Ramos Romero, Diego; Salvadó Rovira, Joan |
| Universitat: N/D |
| Any: 2023 |
| País: N/D |
| Títol: Augmented Reality for the Enhancement of Space Product Assurance and Safety |
| Autor: Alarcón Ruiz, Raúl |
| Director: Gavaldà Martínez, Josefa; Marín Genescà, Marc; Ruiz Martí, José Javier |
| Universitat: N/D |
| Any: 2021 |
| País: N/D |
| Títol: Dual-curing thiol-acrylate-epoxy thermosets for functional applications |
| Autor: Claudio Russo |
| Director: De La Flor Lopez, Silvia; Fernandez-Francos, Xavier |
| Universitat: N/D |
| Any: 2021 |
| País: N/D |
| Publicacions en Revista / Papers |
| 2021 | 2022 | 2023 | 2024 | 2025 |
|---|
| Títol: Numerical Analysis of the Near-Wake Flow Field of Two Closely Spaced Wind Turbines with Passive Flow Control Ducts |
| Autors: Abid, Maytham M; Marin-Genesca, Marc |
| Any: 2025 Clau: Article |
| Revista: Inventions |
| País: N/D |
| Títol: Touch Empowerment: Self-Sustaining e-Tattoo Thermoelectric System for Temperature Mapping |
| Autors: Almeida, MAS; Pires, AL; Ramirez, JL; Malik, SB; de la Flor, S; Llobet, E; Pereira, AT; Pereira, AM |
| Any: 2025 Clau: Article |
| Revista: Advanced Science |
| País: N/D |
| Títol: A hybrid data-driven Co-simulation approach for enhanced integrations of renewables and thermal storage in building district energy systems |
| Autors: Elomari, Y; Aspetakis, G; Mateu, C; Shobo, A; Boer, D; Marín-Genescà, M; Wang, Q |
| Any: 2025 Clau: Article |
| Revista: Journal Of Building Engineering |
| País: N/D |
| Títol: Evaluation of the effect of coupling agent on the kinetic and mechanical properties of a 3D printable dual curing epoxy/acrylate system |
| Autors: Escriba-Flores, AA; Fernández-Francos, X; Ferrando, F; Fabregat-Sanjuan, A |
| Any: 2025 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Tunable dual-curing acrylic/epoxy systems for 3D printing with enhanced joint performance via carbon nanotubes |
| Autors: Escriba-Flores, AA; Fernández-Francos, X; Ferrando, F; Fabregat-Sanjuan, A |
| Any: 2025 Clau: Article |
| Revista: Polymer |
| País: N/D |
| Títol: Development of a high-performance dual-curing Vitrimeric acrylate/epoxy system for 3D printing: Analysis of thermal effect and network evolution |
| Autors: Escribá-Flores, A; Gaca, S; Fernández-Francos, X; Schlögl, S; Fabregat-Sanjuan, A |
| Any: 2025 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Analysis of a methodology for engineering education based on service-learning projects for ecological and social entities while using conceive, design, implement and operate phases |
| Autors: Fabregat-Sanjuan A; Brosa Rodríguez D; Balsells O; Ismael-Biosca V; Huera-Huarte F; Pàmies Vilà R |
| Any: 2025 Clau: Article |
| Revista: International Journal Of Mechanical Engineering Education |
| País: N/D |
| Títol: Inspiring engineering education: Service learning in manufacturing projects for ecological entities |
| Autors: Fabregat-Sanjuan A; Mayolas A; Balsells O; Ismael-Biosca V; Huera-Huarte F; Pàmies-Vilà R |
| Any: 2025 Clau: Article |
| Revista: International Journal Of Mechanical Engineering Education |
| País: N/D |
| Títol: Preparation and characterization of alginate-based capsules containing lavender essential oil for acne therapy |
| Autors: Kabalan, Y; Bernarda, H; Montané, X; de la Flor, S; Tylkowski, B; Trojanowska, A; La Gatta, A; Giamberini, M |
| Any: 2025 Clau: Article |
| Revista: Carbohydrate Polymer Technologies And Applications |
| País: N/D |
| Títol: Synthesis and characterization of biobased capsules formed from interpenetrating networks of alginate and poly(ethylene glycol) for the encapsulation of blue dye |
| Autors: Kabalan, Y; Tylkowski, B; de la Flor, S; Giamberini, M; Montané, X |
| Any: 2025 Clau: Article |
| Revista: Scientific Reports |
| País: N/D |
| Títol: Flexible gas sensor based on rGO-ZnO for NO2 detection at room temperature |
| Autors: Komorizono, AA; Leite, RR; de la Flor, S; Llobet, E; Mastelaro, VR |
| Any: 2025 Clau: Article |
| Revista: Materials Science In Semiconductor Processing |
| País: N/D |
| Títol: Mechanical Integrity Assessment of Polymethylmethacrylate Bone Cement Incorporating Local Anesthetics: Implications for Joint Arthroplasty |
| Autors: Monfort-Mira, M; Balaguer-Castro, M; Jornet-Gibert, M; Cito, S; De la Flor-López, S; Torner, P |
| Any: 2025 Clau: Article |
| Revista: Journal Of Arthroplasty |
| País: N/D |
| Títol: Analysis of covalent adaptable networks Based on disulfide exchange through broadband dielectric spectroscopy |
| Autors: Pascual-Jose, B; Teruel-Juanes, R; de la Flor, S; Serra, A; Ribes-Greus, A |
| Any: 2025 Clau: Article |
| Revista: Polymer Testing |
| País: N/D |
| Títol: Maternal prenatal nut and seafood consumption and child neuropsychological function from 4 to 15 years of age: a population-based cohort study |
| Autors: Pinar-Martí, A; Ayala-Aldana, N; Ruiz-Rivera, M; Lertxundi, N; Subiza-Pérez, M; González-Safont, L; Vioque, J; Riaño-Galán, I; Rodríguez-Dehli, C; Iglesias-Vázquez, L; Arija, V; Fernández-Barrés, S; Romaguera, D; Pascual-Rubio, V; Fabregat-Sanjuan, A; Healy, D; Basagaña, X; Vrijheid, M; Guxens, M; Foraster, M; Julvez, J |
| Any: 2025 Clau: Article |
| Revista: American Journal Of Clinical Nutrition |
| País: N/D |
| Títol: Maternal nut and fish consumption during pregnancy and child risky decision-making at 11 years old |
| Autors: Rivera, MR; Pinar-Marti, A; Babarro, I; Ibarluzea, J; Vioque, J; Llop, S; Fernández-Somoano, A; Tardón, A; Pascual-Rubio, V; Fabregat-Sanjuan, A; Fernández-Barres, S; Romaguera, D; Guxens, M; Julvez, J |
| Any: 2025 Clau: Article |
| Revista: European Child & Adolescent Psychiatry |
| País: N/D |
| Títol: Biobased poly(amido-imide) CANs catalyzed by lanthanide triflates: High creep resistance and superior reprocessability |
| Autors: Roig, A; Padilla, J; de la Flor, S; Serra, A |
| Any: 2025 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Improving the reversible adhesion performance of an epoxy vitrimer adhesive through surface treatment technology |
| Autors: Surós M; Verdugo P; Santiago D; De la Flor S |
| Any: 2025 Clau: Article |
| Revista: Journal Of Adhesion |
| País: N/D |
| Títol: Catalytic effect of rare-earth triflates in the relaxation and creep behavior of poly(epoxy imine) vitrimers |
| Autors: Telatin, T; De la Flor, S; Serra, A; Montané, X |
| Any: 2025 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Custom-shaped malleable, recyclable and reversible structural adhesives based on vanillin polyimine vitrimers |
| Autors: Vilanova-Pérez, A; Surós, M; Serra, A; de la Flor, S; Roig, A |
| Any: 2025 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Analysis of the non-ideal crosslinking process in thiol-X "click" thermosets |
| Autors: Belmonte, A; De la Flor, S; Konuray, O; Fernández-Francos, X; Ramis, X |
| Any: 2024 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Recycling devulcanized EPDM to improve engineering properties of SBR rubber compounds |
| Autors: Colom X; Marín M; Saeb MR; Formela K; Cañavate J |
| Any: 2024 Clau: Article |
| Revista: Resources, Conservation And Recycling Advances |
| País: N/D |
| Títol: A data-driven framework for designing a renewable energy community based on the integration of machine learning model with life cycle assessment and life cycle cost parameters |
| Autors: Elomari, Y; Mateu, C; Marín-Genescà, M; Boer, D |
| Any: 2024 Clau: Article |
| Revista: Applied Energy |
| País: N/D |
| Títol: Analysis of electrode performance on amplitude integrated electroencephalography in neonates: evaluation of a new electrode aCUP-E vs. liquid gel electrodes |
| Autors: Fabregat-Sanjuan, A; Rodríguez-Ballabriga, A; Rigo-Vidal, A; Pàmies-Vilà, R; Larrosa-Capaces, S; Rius-Costa, V; Pascual-Rubio, V |
| Any: 2024 Clau: Article |
| Revista: Frontiers In Pediatrics |
| País: N/D |
| Títol: Preparation and Characterization of Novel Poly(thiourethane)-Poly(isocyanurate) Covalent Adaptable Networks: Effect of the Catalysts |
| Autors: Guerrero, F; De la Flor, S; Serra, A |
| Any: 2024 Clau: Article |
| Revista: Macromolecular Rapid Communications |
| País: N/D |
| Títol: Dielectric characteristics of various polymers (PVC, HDPE, EVA, PP, PS, PA and ABS) reinforced with end-of-life tires (GTR) |
| Autors: Mujal-Rosas, R; Marin-Genesca, M; Colom-Fajula, X; Saluena-Berna, X |
| Any: 2024 Clau: Article |
| Revista: Afinidad |
| País: N/D |
| Títol: Eugenol-based dual-cured materials with multiple dynamic exchangeable bonds |
| Autors: Roig, A; Ramis, X; de la Flor, S; Serra, A |
| Any: 2024 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Controlled and Safe Hydrogen Generation from Waste Aluminum and Water, a New Approach to Hydrogen Generation |
| Autors: Saluena-Berna, Xavier; Marin-Genesca, Marc; Rosas, Ramon Mujal; Arias, Manuel-Jose Lis |
| Any: 2024 Clau: Article |
| Revista: Materials |
| País: N/D |
| Títol: Reversible adhesives from epoxy-based transesterification-induced vitrimers |
| Autors: Surós, M; Santiago, D; Verdugo, P; Pedrola, M; de la Flor, S |
| Any: 2024 Clau: Article |
| Revista: Polymer |
| País: N/D |
| Títol: Chemically Degradable Vitrimers Based on Divanillin Imine Diepoxy Monomer and Aliphatic Diamines for Enhanced Carbon Fiber Composite Applications |
| Autors: Telatin, T; de la Flor, S; Montané, X; Serra, A |
| Any: 2024 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Poly(epoxy-imine) vitrimers. Effect of the structure on the stress relaxation and creep resistance |
| Autors: Telatin, T; de la Flor, S; Serra, A; Montané, X |
| Any: 2024 Clau: Article |
| Revista: Polymer Testing |
| País: N/D |
| Títol: A Biobased Epoxy Vitrimer with Dual Relaxation Mechanism: A Promising Material for Renewable, Reusable, and Recyclable Adhesives and Composites |
| Autors: Verdugo, P; Santiago, D; de la Flor, S; Serra, A |
| Any: 2024 Clau: Article |
| Revista: Acs Sustainable Chemistry & Engineering |
| País: N/D |
| Títol: Strategies towards Fully Recyclable Commercial Epoxy Resins: Diels-Alder Structures in Sustainable Composites |
| Autors: Vidal, J; Hornero, C; de la Flor, S; Vilanova, A; Dieste, JA; Castell, P |
| Any: 2024 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Biobased Imine Vitrimers Obtained by Photo and Thermal Curing Procedures Promising Materials for 3D Printing |
| Autors: Vilanova-Pérez, A; De la Flor, S; Fernández-Francos, X; Serra, A; Roig, A |
| Any: 2024 Clau: Article |
| Revista: Acs Applied Polymer Materials |
| País: N/D |
| Títol: Analysis of the Use of Recycled Aluminum to Generate Green Hydrogen in an Electric Bicycle |
| Autors: Berna, XS; Marín-Genescá, M; Dagà-Monmany, JM |
| Any: 2023 Clau: Article |
| Revista: Metals |
| País: N/D |
| Títol: Evaluation and rationale of the performance of several elastomeric composites incorporating devulcanized EPDM |
| Autors: Colom, X; Carrillo-Navarrete, F; Saeb, MR; Marin, M; Formela, K; Cañavate, J |
| Any: 2023 Clau: Article |
| Revista: Polymer Testing |
| País: N/D |
| Títol: New approach in the reuse of modified ground tire rubber as thermal and acoustic insulation to be used in civil engineering |
| Autors: Colom, X; Girbau, J; Marin, M; Formela, K; Saeb, RM; Carrillo, F; Cañavate, J |
| Any: 2023 Clau: Article |
| Revista: Journal Of Material Cycles And Waste Management |
| País: N/D |
| Títol: Comparison of electrode position marking procedures on the cranial surface |
| Autors: Fabregat-Sanjuan, A; Pàmies-Vilà, R; Rigo-Vidal, A; Pascual-Rubio, V |
| Any: 2023 Clau: Article |
| Revista: Brain And Behavior |
| País: N/D |
| Títol: Stone sawing machine at the Temple of Artemis in Jerash, Jordan |
| Autors: Genaro González Baixauli; Blas Herrera Gómez |
| Any: 2023 Clau: Article |
| Revista: Dyna-Colombia |
| País: N/D |
| Títol: Stone sawing machine at the Temple of Artemis in Jerash, Jordan |
| Autors: González G; Herrera B |
| Any: 2023 Clau: Article |
| Revista: Dyna-Colombia |
| País: N/D |
| Títol: The use of lanthanide triflates in the preparation of poly(thiourethane) covalent adaptable networks |
| Autors: Guerrero, F; Gamardella, F; Ramis, X; de la Flor, S; Serra, A |
| Any: 2023 Clau: Article |
| Revista: Polymer |
| País: N/D |
| Títol: Preparation and Characterization of a Series of Self-Healable Bio-Based Poly(thiourethane) Vitrimer-like Materials |
| Autors: Guerrero, F; Ramis, X; De la Flor, S; Serra, A |
| Any: 2023 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Preparation of poly(thiourethane) networks by using a novel acidic organocatalyst. Evaluation of their vitrimer-like behavior |
| Autors: Guerrero, F; Ramis, X; de la Flor, S; Serra, A |
| Any: 2023 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Design and assembly of biodegradable capsules based on alginate hydrogel composite for the encapsulation of blue dye |
| Autors: Kabalan, Y; Montané, X; Tylkowski, B; de la Flor, S; Giamberini, M |
| Any: 2023 Clau: Article |
| Revista: International Journal Of Biological Macromolecules |
| País: N/D |
| Títol: Insights into the Structural and Dielectric Behavior of Composites Produced from EPDM Waste Processed through a Devulcanization Method and SBR |
| Autors: Marin-Genescà, M; García-Amorós, J; Mudarra, M; Vidal, LM; Cañavate, J; Colom, X |
| Any: 2023 Clau: Article |
| Revista: Acs Omega |
| País: N/D |
| Títol: Analysis of Poly(thiourethane) Covalent Adaptable Network through Broadband Dielectric Spectroscopy |
| Autors: Pascual-Jose B; De la Flor S; Serra A; Ribes-Greus A |
| Any: 2023 Clau: Article |
| Revista: Acs Applied Polymer Materials |
| País: N/D |
| Títol: Structural and mechanical analysis on mannuronate-rich alginate gels and xerogels beads based on Calcium, Copper and Zinc as crosslinkers |
| Autors: Reig-Vano, B; Huck-Iriart, C; de la Flor, S; Trojanowska, A; Tylkowski, B; Giamberini, M |
| Any: 2023 Clau: Article |
| Revista: International Journal Of Biological Macromolecules |
| País: N/D |
| Títol: Disulfide vitrimeric materials based on cystamine and diepoxy eugenol as bio-based monomers |
| Autors: Roig, A; Agizza, M; Serra, A; de la Flor, S |
| Any: 2023 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Towards fast relaxation rates and creep resistance in disulfide vitrimer-like materials |
| Autors: Roig, A; D'Agostino, V; Serra, A; de la Flor, S |
| Any: 2023 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Structural reversible adhesives based on thiol-epoxy vitrimers |
| Autors: Roig, A; Molina, L; Serra, A; Santiago, D; De la Flor, S |
| Any: 2023 Clau: Article |
| Revista: Polymer Testing |
| País: N/D |
| Títol: Dual-cured thermosets based on eugenol derivatives and thiol chemistry |
| Autors: Roig, A; Ramis, X; De la Flor, S; Serra, A |
| Any: 2023 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Recyclable and Reprocessable Epoxy Vitrimer Adhesives |
| Autors: Santiago, D; Guzman, D; Padilla, J; Verdugo, P; de la Flor, S; Serra, A |
| Any: 2023 Clau: Article |
| Revista: Acs Applied Polymer Materials |
| País: N/D |
| Títol: Cleaning archaeological bones: Influence of water, ethanol, and acetone on microhardness |
| Autors: Valtierra, N; Courtenay, LA; Fabregat-Sanjuan, A; López-Polín, L |
| Any: 2023 Clau: Article |
| Revista: International Journal Of Osteoarchaeology |
| País: N/D |
| Títol: Approaching Self-Bonded Medium Density Fiberboards Made by Mixing Steam Exploded Arundo donax L. and Wood Fibers: A Comparison with pMDI-Bonded Fiberboards on the Primary Properties of the Boards |
| Autors: Vitrone, F; Brinker, S; Ramos, D; Ferrando, F; Salvadó, J; Mai, C |
| Any: 2023 Clau: Article |
| Revista: Materials |
| País: N/D |
| Títol: Análisis del curado dual en resinas epoxi mediante un molde instrumentado |
| Autors: Albert Fabregat Sanjuan; Javier Fernández; Francesc Ferrando Piera |
| Any: 2022 Clau: Article |
| Revista: Técnica Industrial |
| País: N/D |
| Títol: Energy Analysis of Control Measures for Reducing Aerosol Transmission of COVID¿19 in the Tourism Sector of the ¿Costa Daurada¿ Spain |
| Autors: Ayou, DS; Prieto, J; Ramadhan, F; Gonzalez, G; Duro, JA; Coronas, A |
| Any: 2022 Clau: Article |
| Revista: Energies |
| País: N/D |
| Títol: Integration of Solar Photovoltaic Systems into Power Networks: A Scientific Evolution Analysis |
| Autors: Elomari, Y; Norouzi, M; Marín-Genescà, M; Fernández, A; Boer, D |
| Any: 2022 Clau: Review |
| Revista: Sustainability |
| País: N/D |
| Títol: Controlled composite processing based on off-stoichiometric thiol-epoxy dual-curing systems with sequential heat release (SHR) |
| Autors: Fabregat-Sanjuan, A; Fernández-Francos, X; Ferrando-Piera, F |
| Any: 2022 Clau: Article |
| Revista: Journal Of Applied Polymer Science |
| País: N/D |
| Títol: Supported liquid membranes for the removal of pharmaceuticals from aqueous solutions |
| Autors: Farah, M; Giralt, J; Stüber, F; Font, J; Fabregat, A; Fortuny, A |
| Any: 2022 Clau: Article |
| Revista: Journal Of Water Process Engineering |
| País: N/D |
| Títol: Novel hybrid organic/inorganic poly(thiourethane) covalent adaptable networks |
| Autors: Guerrero, F; de la Flor, S; Ramis, X; Santos, JI; Serra, A |
| Any: 2022 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Comparative analysis of thermal structural and electrical properties between high density polyethylene (HD-PE), and HD-PE reinforced with tires at the end of its useful life. Application study as a dielectric |
| Autors: Marin-Genesca, Marc; Mujal-Rosas, Ramon; Garcia-Amoros, Jordi; Massagues Vidal, Lluis; Pou Ibar, Oriol; Colom Fajula, Xavier |
| Any: 2022 Clau: Article |
| Revista: Afinidad |
| País: N/D |
| Títol: Dielectric Properties in Oriented and Unoriented Membranes Based on Poly(Epichlorohydrin-co-Ethylene Oxide) Copolymers: Part III |
| Autors: Pascual-Jose, B; Zare, A; De la Flor, S; Reina, JA; Giamberini, M; Ribes-Greus, A |
| Any: 2022 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Impact of a Gamification Learning System on the Academic Performance of Mechanical Engineering Students |
| Autors: Pàmies-Vilà, R; Fabregat-Sanjuan, A; Puig-Ortiz, J; Nebot, LJ; Fernández, AH |
| Any: 2022 Clau: Article |
| Revista: International Journal Of Engineering Education |
| País: N/D |
| Títol: Vitrimeric Epoxy-Amine Polyimine Networks Based on a Renewable Vanillin Derivative |
| Autors: Roig, A; Hidalgo, P; Ramis, X; De la Flor, S; Serra, A |
| Any: 2022 Clau: Article |
| Revista: Acs Applied Polymer Materials |
| País: N/D |
| Títol: Synthesis and characterization of new bio-based poly(acylhydrazone) vanillin vitrimers |
| Autors: Roig, A; Petrauskaité, A; Ramis, X; De la Flor, S; Serra, A |
| Any: 2022 Clau: Article |
| Revista: Polymer Chemistry |
| País: N/D |
| Títol: Adhesive properties of thiol-acrylate-epoxy composites obtained by dual-curing procedures |
| Autors: Russo, C; Bustamante, F; Fernández-Francos, X; De la Flor, S |
| Any: 2022 Clau: Article |
| Revista: International Journal Of Adhesion And Adhesives |
| País: N/D |
| Títol: Electro-responsive shape-memory composites obtained via dual-curing processing |
| Autors: Russo, C; Ramírez, JL; Fernández-Francos, X; De la Flor, S |
| Any: 2022 Clau: Article |
| Revista: Polymers For Advanced Technologies |
| País: N/D |
| Títol: Microscopic modifications produced by mechanical cleaning interventions on archaeological bone |
| Autors: Valtierra, N; Díaz-Cortés, A; Courtenay, LA; Fabregat-Sanjuan, A; López-Polín, L |
| Any: 2022 Clau: Article |
| Revista: Journal Of Cultural Heritage |
| País: N/D |
| Títol: All-lignocellulosic fiberboards from giant reed (Arundo donax L.): Effect of steam explosion pre-treatment on physical and mechanical properties |
| Autors: Vitrone, F; Ramos, D; Vitagliano, V; Ferrando, F; Salvadó, J |
| Any: 2022 Clau: Article |
| Revista: Construction And Building Materials |
| País: N/D |
| Títol: Tribological Behavior of Microalloyed Cu50Zr50 Alloy |
| Autors: Younes, A; de la Flor, S; Clark, SJ; Nutter, J; Birkett, M; Watson, JO; Unthank, M; Gonzalez, S |
| Any: 2022 Clau: Article |
| Revista: Journal Of Tribology-Transactions Of The Asme |
| País: N/D |
| Títol: Anàlisi de les qualificacions obtingudes amb una estrategia docent ludificada: Cas pràctic en assignatures de l¿àmbit de l¿enginyeria mecànica |
| Autors: Albert Fabregat Sanjuan; Rosa Pàmies Vilà; María Verdú Pina; Cristina Victoria Urbina Pons; Francisco J Huera Huarte; Francesc Ferrando Piera |
| Any: 2021 Clau: Article |
| Revista: Revista Del Cidui: Congrés Internacional De Docència Universitària I Innovació |
| País: N/D |
| Títol: Analysis of Valorization Process of Aluminum Breakage Scraps to Obtain Green Hydrogen |
| Autors: Berna, Xavier Saluena; Marin-Genesca, Marc; Maria Daga-Monmany, Jose |
| Any: 2021 Clau: Article |
| Revista: Metals |
| País: N/D |
| Títol: Enhancement of 3D-printable materials by dual-curing procedures |
| Autors: Fernández-Francos, X; Konuray, O; Ramis, X; Serra, A; De la Flor, S |
| Any: 2021 Clau: Review |
| Revista: Materials |
| País: N/D |
| Títol: Actuator Behaviour of Tailored Poly(thiourethane) Shape Memory Thermosets |
| Autors: Gamardella, F; Serra, A; Ramis, X; De la Flor, S |
| Any: 2021 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Acoustic simulation of the Central Hall in Palau GÜELL by GAUDÍ |
| Autors: González G; Samper A; Herrera B |
| Any: 2021 Clau: Article |
| Revista: Architecture And Engineering |
| País: N/D |
| Títol: Cost-Effectively 3D-Printed Rigid and Versatile Interpenetrating Polymer Networks |
| Autors: Konuray, O; Sola, A; Bonada, J; Tercjak, A; Fabregat-Sanjuan, A; Fernández-Francos, X; Ramis, X |
| Any: 2021 Clau: Article |
| Revista: Materials |
| País: N/D |
| Títol: Study analysis of thermal, dielectric and functional characteristics of an ethylene polyethylene diene monomer blended with end-of-life tire microparticles amounts |
| Autors: Marín-Genescà, M; Mujal-Rosas, R; García-Amorós, J; Mudarra, M; Juan, XR; Fajula, XC |
| Any: 2021 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Influence of tire rubber particles addition in different branching degrees polyethylene matrix composites on physical and structural behavior |
| Autors: Marín-Genescà, M; Rosas, RM; Amoros, JG; Vidal, LM; Fajula, XC |
| Any: 2021 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Dielectric characterization and analysis of linear low-density polyethylene (LLDPE) compounds mixed with out-of-use tire particles (GTR) |
| Autors: Mujal-Rosas, R; Marín-Genescà, M; García-Amorós, J; Colom, X; Mudarra, M; Massagués, L |
| Any: 2021 Clau: Article |
| Revista: Afinidad |
| País: N/D |
| Títol: Dual-cured thermosets from glycydil methacrylate obtained by epoxy-amine reaction and methacrylate homopolymerization |
| Autors: Roig, A; Ramis, X; De la Flor, S; Serra, A |
| Any: 2021 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Sequential photo-thermal curing of (meth)acrylate-epoxy thiol formulations |
| Autors: Roig, A; Ramis, X; De la Flor, S; Serra, A |
| Any: 2021 Clau: Article |
| Revista: Polymer |
| País: N/D |
| Títol: Shape-memory actuators based on dual-curing thiol-acrylate-epoxy thermosets |
| Autors: Russo, C; Fernandez-Francos, X; De la Flor, S |
| Any: 2021 Clau: Article |
| Revista: Express Polymer Letters |
| País: N/D |
| Títol: Waste Aluminum Application as Energy Valorization for Hydrogen Fuel Cells for Mobile Low Power Machines Applications |
| Autors: Saluena-Berna, X; Marin-Genesca, M; Vidal, LM; Daga-Monmany, JM |
| Any: 2021 Clau: Article |
| Revista: Materials |
| País: N/D |
| Títol: From Supramolecular Hydrogels to Multifunctional Carriers for Biologically Active Substances |
| Autors: Skopinska-Wisniewska, J; De la Flor, S; Kozlowska, J |
| Any: 2021 Clau: Review |
| Revista: International Journal Of Molecular Sciences |
| País: N/D |
| Títol: Binderless Fiberboards for Sustainable Construction. Materials, Production Methods and Applications |
| Autors: Vitrone, F; Ramos, D; Ferrando, F; Salvadó, J |
| Any: 2021 Clau: Article |
| Revista: Journal Of Building Engineering |
| País: N/D |
| Títol: Membranes for Cation Transport Based on Dendronized Poly(epichlorohydrin-co-ethylene oxide). Part 1: The Effect of Dendron Amount and Column Orientation on Copolymer Mobility |
| Autors: Zare, A; Montane, X; Reina, JA; Giamberini, M |
| Any: 2021 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Llibres / Books |
| 2021 | 2022 | 2023 | 2024 | 2025 |
|---|
| Capítols de Llibre / Book chapters |
| 2021 | 2022 | 2023 | 2024 | 2025 |
|---|
| Títol: Toward the recyclability of thermosetting polymers |
| Autors: Gamardella F; De la Flor S; Ramis X; Serra À |
| Any: 2022 Clau: Book Chapters |
| Altres Documents / Other documents |
| 2021 | 2022 | 2023 | 2024 | 2025 |
|---|
| Patents Sol.licitades / Patents |
| 2021 | 2022 | 2023 | 2024 | 2025 |
|---|
| Títol: FORMULACIÓN DE CURADO DUAL PARA IMPRESIÓN 3D |
| Autors: FABREGAT SANJUAN, ALBERT (Autor o Coautor) |
| Any: 2024 Tipus: Utility Model |
| Organismes: N/D |
| Països: N/D |
| Títol: METHOD AND SYSTEM FOR GUIDING ELECTRODE PLACEMENT ON THE SCALP |
| Autors: FABREGAT SANJUAN, ALBERT (Autor o Coautor); PASCUAL RUBIO, VICENÇ (Autor o Coautor) |
| Any: 2021 Tipus: Patent |
| Organismes: N/D |
| Països: N/D |
| Congressos / Conferences |
| 2021 | 2022 | 2023 | 2024 | 2025 |
|---|
| Autor/a: Albert Fabregat-Sanjuan, Rosa Pàmies-Vilà, Agnès Rigo-Vidal, Vicenç Pascual-Rubio |
| Títol: Análisis de un nuevo método para el posicionado en el cuero cabelludo según el sistema 10/20 |
| Congrés/acte: N/D |
| Congrés/acte: Paper |
| Any: 2022 |
| Autor/a: Albert Fabregat-Sanjuan, Rosa Pàmies-Vilà, María Verdú, Cristina Urbina Pons, Francisco Huera-Huarte, Francesc Ferrando-Piera |
| Títol: Anàlisi de les qualificacions obtingudes amb una estrategia docent ludificada |
| Congrés/acte: Cidui 2020+1 |
| Congrés/acte: Speaker |
| Any: 2021 |
| Autor/a: Albert Fabregat-Sanjuan, Rosa Pàmies-Vilà, María Verdú, Cristina Urbina Pons, Francisco Huera-Huarte, Francesc Ferrando-Piera |
| Títol: Análisis de las calificaciones en actividades ludificadas |
| Congrés/acte: Anales De Ingenieria Mecanica |
| Congrés/acte: Speaker |
| Any: 2021 |
| Autor/a: Albert Fabregat-Sanjuan, Xavier Fernández-Francos, Francesc Ferrando-Piera |
| Títol: Análisis del curado dual en resinas epoxi mediante un molde instrumentado |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2021 |
