Resultats - Fernández Francos, Xavier
Fernández Francos, Xavier
| Tesis Doctorals Dirigides / Theses |
| 2019 | 2020 | 2021 | 2022 | 2023 |
|---|
| Títol: Dual-curing thiol-acrylate-epoxy thermosets for functional applications |
| Autor: Russo, Claudio |
| Director: Fernández Francos, Xavier; De La Flor Lopez, Silvia |
| Universitat: N/D |
| Any: 2021 |
| País: N/D |
| Títol: Dual-curing thiol-acrylate-epoxy thermosets for functional applications |
| Autor: Claudio Russo |
| Director: De La Flor Lopez, Silvia; Fernandez-Francos, Xavier |
| Universitat: N/D |
| Any: 2021 |
| País: N/D |
| Publicacions en Revista / Papers |
| 2019 | 2020 | 2021 | 2022 | 2023 |
|---|
| Títol: Structural Design of CANs with Fine-Tunable Relaxation Properties: A Theoretical Framework Based on Network Structure and Kinetics Modeling |
| Autors: Konuray, O; Fernández-Francos, X; Ramis, X |
| Any: 2023 Clau: Article |
| Revista: Macromolecules |
| País: N/D |
| Títol: Thiol-Ene Networks with Tunable Dynamicity for Covalent Adaptation |
| Autors: Konuray, O; Moradi, S; Roig, A; Fernández-Francos, X; Ramis, X |
| Any: 2023 Clau: Article |
| Revista: Acs Applied Polymer Materials |
| País: N/D |
| Títol: Thiol¿Ene Networks with Tunable Dynamicity for Covalent Adaptation |
| Autors: Konuray, Osman; Moradi, Sasan; Roig, Adrià; Fernández-Francos, Xavier; Ramis, Xavier |
| Any: 2023 Clau: Article |
| Revista: Acs Applied Polymer Materials |
| País: N/D |
| Títol: 3D printable hybrid acrylate-epoxy dynamic networks |
| Autors: Casado J; Konuray O; Roig A; Fernández-Francos X; Ramis X |
| Any: 2022 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Controlled composite processing based on off-stoichiometric thiol-epoxy dual-curing systems with sequential heat release (SHR) |
| Autors: Fabregat-Sanjuan, Albert; Fernandez-Francos, Xavier; Ferrando-Piera, Francesc; |
| Any: 2022 Clau: Article |
| Revista: Journal Of Applied Polymer Science |
| País: N/D |
| Títol: Electro-responsive shape-memory composites obtained via dual-curing processing |
| Autors: Russo C; Ramírez JL; Fernández-Francos X; De la Flor S |
| Any: 2022 Clau: Article |
| Revista: Polymers For Advanced Technologies |
| País: N/D |
| Títol: Adhesive properties of thiol-acrylate-epoxy composites obtained by dual-curing procedures |
| Autors: Russo, Claudio; Bustamante, Francesc; Fernandez-Francos, Xavier; De la Flor, Silvia; |
| Any: 2022 Clau: Article |
| Revista: International Journal Of Adhesion And Adhesives |
| País: N/D |
| Títol: Controlled composite processing based on off?stoichiometric thiol?epoxy dual?curing systems with sequential heat release (SHR) |
| Autors: Fabregat?Sanjuan, Albert; Fernández?Francos, Xavier; Ferrando?Piera, Francesc |
| Any: 2021 Clau: Article |
| Revista: Journal Of Applied Polymer Science |
| País: N/D |
| Títol: Enhancement of 3D-printable materials by dual-curing procedures |
| Autors: Fernández-Francos X; Konuray O; Ramis X; Serra À; De la Flor S |
| Any: 2021 Clau: Review |
| Revista: Materials |
| País: N/D |
| Títol: Curing kinetics of dually-processed acrylate-epoxy 3D printing resins |
| Autors: Konuray O; Morancho JM; Fernández-Francos X; García-Alvarez M; Ramis X |
| Any: 2021 Clau: Article |
| Revista: Thermochimica Acta |
| País: N/D |
| Títol: Cost-Effectively 3D-Printed Rigid and Versatile Interpenetrating Polymer Networks |
| Autors: Konuray, Osman; Sola, Arnau; Bonada, Jordi; Tercjak, Agnieszka; Fabregat-Sanjuan, Albert; Fernandez-Francos, Xavier; Ramis, Xavier; |
| Any: 2021 Clau: Article |
| Revista: Materials |
| País: N/D |
| Títol: Shape-memory actuators based on dual-curing thiol-acrylate-epoxy thermosets |
| Autors: Russo C; Fernandez-Francos X; De la Flor S |
| Any: 2021 Clau: Article |
| Revista: Express Polymer Letters |
| País: N/D |
| Títol: Dual-curable stereolithography resins for superior thermomechanical properties |
| Autors: Konuray O; Di Donato F; Sangermano M; Bonada J; Tercjak A; Fernández-Francos X; Serra ; Ramis X |
| Any: 2020 Clau: Article |
| Revista: Express Polymer Letters |
| País: N/D |
| Títol: The use of click-type reactions in the preparation of thermosets |
| Autors: Konuray O; Fernández-Francos X; De la Flor S; Ramis X; Serra À |
| Any: 2020 Clau: Review |
| Revista: Polymers |
| País: N/D |
| Títol: Curing kinetics of acrylate-based and 3D printable IPNs |
| Autors: Konuray, Osman; Salla, Jose M.; Morancho, Jose M.; Fernandez-Francos, Xavier; Garcia-Alvarez, Montserrat; Ramis, Xavier; |
| Any: 2020 Clau: Article |
| Revista: Thermochimica Acta |
| País: N/D |
| Títol: Dual curing of an epoxy resin with dicarboxylic acids |
| Autors: Morancho JM; Ramis X; Fernández-Francos X; Konuray O; Salla JM; Serra |
| Any: 2020 Clau: Article |
| Revista: Journal Of Thermal Analysis And Calorimetry |
| País: N/D |
| Títol: Shape-memory actuators based on dual-curing thiol-acrylate-epoxy thermosets |
| Autors: Russo C; Fernandez-Francos X; De la Flor S |
| Any: 2020 Clau: Article |
| Revista: N/D |
| País: N/D |
| Títol: Synthesis and thermophysical characterization of fatty amides for thermal energy storage |
| Autors: Canela-Xandri A; Villorbina G; Balcells M; Fernández-Francos X; Cabeza LF; Canela-Garayoa R |
| Any: 2019 Clau: Article |
| Revista: Molecules |
| País: N/D |
| Títol: Fully renewable thermosets based on bis-eugenol prepared by thiol-click chemistry |
| Autors: Guzmán D, Serra A, Ramis X, Fernández-Francos X, De la Flor S |
| Any: 2019 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Thermal conductive composites prepared by addition of several ceramic fillers to thermally cationic curing cycloaliphatic epoxy resins |
| Autors: Isarn I, Gamardella F, Fernàndez-Francos X, Serra À, Ferrando F |
| Any: 2019 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Acetoacetate based thermosets prepared by dual-Michael addition reactions |
| Autors: Konuray O; Fernández-Francos X; Ramis X; Serra Á |
| Any: 2019 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Time-temperature-transformation (TTT) diagram of dual-curable epoxy thermosets obtained via two sequential epoxy-amine condensations |
| Autors: Konuray O; Salla JM; Morancho JM; Fernández-Francos X; García-Alvarez M; Ramis X |
| Any: 2019 Clau: Article |
| Revista: Thermochimica Acta |
| País: N/D |
| Títol: Hard epoxy thermosets obtained via two sequential epoxy-amine condensation |
| Autors: Konuray, Osman; Garcia, Aina; Morancho, Jose M.; Fernandez-Francos, Xavier; Serra, Angels; Ferrando, Francesc; Garcia-Alvarez, Montserrat; Ramis, Xavier |
| Any: 2019 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Curing and thermomechanical properties of off-stoichiometric anhydride-epoxy thermosets |
| Autors: Morancho J, Ramis X, Fernández-Francos X, Salla J, Konuray O, Serra |
| Any: 2019 Clau: Article |
| Revista: Journal Of Thermal Analysis And Calorimetry |
| País: N/D |
| Títol: Sequential heat release: an innovative approach for the control of curing profiles during composite processing based on dual-curing systems |
| Autors: Romero, Maria; Fernandez-Francos, Xavier; Ramis, Xavier; |
| Any: 2019 Clau: Article |
| Revista: Polymer International |
| País: N/D |
| Títol: Characterization of sequential dual-curing of thiol-acrylate-epoxy systems with controlled thermal properties |
| Autors: Russo C, Serra À, Fernández-Francos X, De la Flor S |
| Any: 2019 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Rheological and mechanical characterization of dual-curing thiol-acrylate-epoxy thermosets for advanced applications |
| Autors: Russo C; Fernández-Francos X; De la Flor S |
| Any: 2019 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Kinetics analysis and simulation of sequential epoxy dual-curing systems with independent thermal activation |
| Autors: Santin, David; Konuray, Osman; Fernandez-Francos, Xavier; Ramis, Xavier; |
| Any: 2019 Clau: Article |
| Revista: Thermochimica Acta |
| País: N/D |
| Llibres / Books |
| 2019 | 2020 | 2021 | 2022 | 2023 |
|---|
| Capítols de Llibre / Book chapters |
| 2019 | 2020 | 2021 | 2022 | 2023 |
|---|
| Títol: Characterization of dual-curing thiol-acrylate-epoxy thermosets with tailorable intermediate and final properties |
| Autors: Claudio Russo; Àngels Serra i Albet; Xavier Fernández Francos; Silvia de la Flor López |
| Any: 2019 Clau: Book Chapters |
| Altres Documents / Other documents |
| 2019 | 2020 | 2021 | 2022 | 2023 |
|---|
| Patents Sol.licitades / Patents |
| 2019 | 2020 | 2021 | 2022 | 2023 |
|---|
| Congressos / Conferences |
| 2019 | 2020 | 2021 | 2022 | 2023 |
|---|
