Resultats - Functional and Smart Materials (FuncMat)
Functional and Smart Materials (FuncMat)
| Tesis Doctorals Dirigides / Theses |
| 2018 | 2019 | 2020 | 2021 | 2022 |
|---|
| Títol: Dual-curing thiol-acrylate-epoxy thermosets for functional applications |
| Autor: Claudio Russo |
| Director: De La Flor Lopez, Silvia; Fernandez-Francos, Xavier |
| Universitat: N/D |
| Any: 2021 |
| País: N/D |
| Títol: Dual-curing thiol-acrylate-epoxy thermosets for functional applications |
| Autor: Claudio Russo |
| Director: De La Flor Lopez, Silvia; Fernandez-Francos, Xavier |
| Universitat: N/D |
| Any: 2021 |
| País: N/D |
| Títol: New epoxy composites with enhanced thermal conductivity keeping electrical insulation. |
| Autor: Isarn Garcia, Isaac |
| Director: Ferrando Piera, Francesc; Serra Albet, Maria Angels |
| Universitat: N/D |
| Any: 2019 |
| País: N/D |
| Títol: New epoxy composites with enhanced thermal conductivity keeping electrical insulation |
| Autor: Isaac Isarn Garcia |
| Director: Serra Albet, Maria Angels (Autor O Coautor); Ferrando Piera, Francesc (Autor O Coautor); Francesc Ferrando Piera (Director); Àngels Serra I Albet |
| Universitat: N/D |
| Any: 2019 |
| País: N/D |
| Títol: New epoxy composites with enhanced thermal conductivity keeping electrical insulation |
| Autor: Isaac Isarn Garcia |
| Director: Serra Albet, Maria Angels (Autor O Coautor); Ferrando Piera, Francesc (Autor O Coautor); Francesc Ferrando Piera (Director); Àngels Serra I Albet |
| Universitat: N/D |
| Any: 2019 |
| País: N/D |
| Títol: New epoxy composites with enhanced thermal conductivity keeping electrical insulation. |
| Autor: Isarn Garcia, Isaac |
| Director: Ferrando Piera, Francesc; Serra Albet, Maria Angels |
| Universitat: N/D |
| Any: 2019 |
| País: N/D |
| Títol: Design and Characterization of Actively-Moving Polymers obtained via Dual-Curing processing |
| Autor: Alberto Belmonte Parra |
| Director: Fernández Francos, Xavier (Autor O Coautor) ; De La Flor Lopez, Silvia |
| Universitat: N/D |
| Any: 2018 |
| País: N/D |
| Títol: Design and analysis of dual-curing systems |
| Autor: Ali Osman Konuray |
| Director: Fernández Francos, Xavier (Autor O Coautor) ; Xavier Ramis Juan; Xavier Fernández Francos |
| Universitat: N/D |
| Any: 2018 |
| País: N/D |
| Títol: Design and characterization of actively-moving polymers obtained via dual-curing processing |
| Autor: Alberto Francisco Belmonte Parra |
| Director: De La Flor Lopez, Silvia (Autor O Coautor); Fernández Francos, Xavier (Autor O Coautor); Silvia De La Flor López (Director); Xavier Fernández Francos |
| Universitat: N/D |
| Any: 2018 |
| País: N/D |
| Títol: Design and characterization of actively-moving polymers obtained via dual-curing processing |
| Autor: Alberto Francisco Belmonte Parra |
| Director: De La Flor Lopez, Silvia (Autor O Coautor); Fernández Francos, Xavier (Autor O Coautor); Silvia De La Flor López (Director); Xavier Fernández Francos |
| Universitat: N/D |
| Any: 2018 |
| País: N/D |
| Títol: Design and Characterization of Actively-Moving Polymers obtained via Dual-Curing processing |
| Autor: Alberto Belmonte Parra |
| Director: Fernández Francos, Xavier (Autor O Coautor) ; De La Flor Lopez, Silvia |
| Universitat: N/D |
| Any: 2018 |
| País: N/D |
| Publicacions en Revista / Papers |
| 2018 | 2019 | 2020 | 2021 | 2022 |
|---|
| Títol: Análisis del curado dual en resinas epoxi mediante un molde instrumentado |
| Autors: Albert Fabregat Sanjuan; Javier Fernández; Francesc Ferrando Piera |
| Any: 2022 Clau: Article |
| Revista: Técnica Industrial |
| País: N/D |
| Títol: 3D printable hybrid acrylate-epoxy dynamic networks |
| Autors: Casado J; Konuray O; Roig A; Fernández-Francos X; Ramis X |
| Any: 2022 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Controlled composite processing based on off-stoichiometric thiol-epoxy dual-curing systems with sequential heat release (SHR) |
| Autors: Fabregat-Sanjuan, Albert; Fernandez-Francos, Xavier; Ferrando-Piera, Francesc; |
| Any: 2022 Clau: Article |
| Revista: Journal Of Applied Polymer Science |
| País: N/D |
| Títol: Evaluation of the beam-F3 method for locating the F3 position from the 10¿20 international system |
| Autors: Fabregat-Sanjuan, Albert; Pã mies-VilÃ, Rosa; Pascual-Rubio, Vicenç |
| Any: 2022 Clau: Article |
| Revista: Brain Stimulation |
| País: N/D |
| Títol: The Role of Eucalyptus Species on the Structural and Thermal Performance of Cellulose Nanocrystals (CNCs) Isolated by Acid Hydrolysis |
| Autors: Gil-Castell O; Reyes-Contreras P; Barra PA; Mendonça RT; Carrillo-Varela I; Badia JD; Serra A; Ribes-Greus A |
| Any: 2022 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Novel hybrid organic/inorganic poly(thiourethane) covalent adaptable networks |
| Autors: Guerrero, Federico; De la Flor, Silvia; Ramis, Xavier; Santos, Jose-Ignacio; Serra, Angels; |
| Any: 2022 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Dielectric Properties in Oriented and Unoriented Membranes Based on Poly(Epichlorohydrin-co-Ethylene Oxide) Copolymers: Part III |
| Autors: Pascual-Jose B; Zare A; De la Flor S; Reina JA; Giamberini M; Ribes-Greus A |
| Any: 2022 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Vitrimeric Epoxy-Amine Polyimine Networks Based on a Renewable Vanillin Derivative |
| Autors: Roig, Adria; Hidalgo, Pere; Ramis, Xavier; De la Flor, Silvia; Serra, Angels; |
| Any: 2022 Clau: Article |
| Revista: Acs Applied Polymer Materials |
| País: N/D |
| Títol: Synthesis and characterization of new bio-based poly(acylhydrazone) vanillin vitrimers |
| Autors: Roig, Adria; Petrauskaite, Aina; Ramis, Xavier; De la Flor, Silvia; Serra, Angels; |
| Any: 2022 Clau: Article |
| Revista: Polymer Chemistry |
| País: N/D |
| Títol: Electro-responsive shape-memory composites obtained via dual-curing processing |
| Autors: Russo C; Ramírez JL; Fernández-Francos X; De la Flor S |
| Any: 2022 Clau: Article |
| Revista: Polymers For Advanced Technologies |
| País: N/D |
| Títol: Adhesive properties of thiol-acrylate-epoxy composites obtained by dual-curing procedures |
| Autors: Russo, Claudio; Bustamante, Francesc; Fernandez-Francos, Xavier; De la Flor, Silvia; |
| Any: 2022 Clau: Article |
| Revista: International Journal Of Adhesion And Adhesives |
| País: N/D |
| Títol: Enhancement of Epoxy Thermosets with Hyperbranched and Multiarm Star Polymers: A Review |
| Autors: Santiago, David; Serra, Angels; |
| Any: 2022 Clau: Review |
| Revista: Polymers |
| País: N/D |
| Títol: Microscopic modifications produced by mechanical cleaning interventions on archaeological bone |
| Autors: Valtierra N; Díaz-Cortés A; Courtenay LA; Fabregat-Sanjuan A; López-Polín L |
| Any: 2022 Clau: Article |
| Revista: Journal Of Cultural Heritage |
| País: N/D |
| Títol: The influence of thickness and final heat treatment on mechanical properties and dimensional stability of binderless fiberboards from steam exploded Arundo donax L |
| Autors: Vitrone F; Ramos D; Ferrando F; Salvadó J |
| Any: 2022 Clau: Article |
| Revista: Materials Today: Proceedings |
| País: N/D |
| Títol: All-lignocellulosic fiberboards from giant reed (Arundo donax L.): Effect of steam explosion pre-treatment on physical and mechanical properties |
| Autors: Vitrone F; Ramos D; Vitagliano V; Ferrando F; Salvadó J |
| Any: 2022 Clau: Article |
| Revista: Construction And Building Materials |
| País: N/D |
| Títol: Tribological Behavior of Microalloyed Cu50Zr50 Alloy |
| Autors: Younes, A.; de la Flor, S.; Clark, S. J.; Nutter, J.; Birkett, M.; Watson, J. O.; Unthank, M.; Gonzalez, Sergio; |
| Any: 2022 Clau: Article |
| Revista: Journal Of Tribology-Transactions Of The Asme |
| País: N/D |
| Títol: Anàlisi de les qualificacions obtingudes amb una estrategia docent ludificada: Cas pràctic en assignatures de l¿àmbit de l¿enginyeria mecànica |
| Autors: Albert Fabregat Sanjuan; Rosa Pàmies Vilà; María Verdú Pina; Cristina Victoria Urbina Pons; Francisco J Huera Huarte; Francesc Ferrando Piera |
| Any: 2021 Clau: Article |
| Revista: Revista Del Cidui: Congrés Internacional De Docència Universitària I Innovació |
| País: N/D |
| Títol: Controlled composite processing based on off-stoichiometric thiol-epoxy dual-curing systems with sequential heat release (SHR) |
| Autors: Albert Fabregat-Sanjuan, Xavier Fernández-Francos, Francesc Ferrando-Piera |
| Any: 2021 Clau: Article |
| Revista: Journal Of Applied Polymer Science |
| País: N/D |
| Títol: Controlled composite processing based on off?stoichiometric thiol?epoxy dual?curing systems with sequential heat release (SHR) |
| Autors: Fabregat?Sanjuan, Albert; Fernández?Francos, Xavier; Ferrando?Piera, Francesc |
| Any: 2021 Clau: Article |
| Revista: Journal Of Applied Polymer Science |
| País: N/D |
| Títol: Binderless Fiberboards for Sustainable Construction. Materials, Production Methods and Applications |
| Autors: Federica Vitrone; RAMOS ROMERO, DIEGO; Francesc Ferrando Piera; Joan Salvadó Rovira |
| Any: 2021 Clau: Review |
| Revista: Journal Of Building Engineering |
| País: N/D |
| Títol: Enhancement of 3D-printable materials by dual-curing procedures |
| Autors: Fernández-Francos X; Konuray O; Ramis X; Serra À; De la Flor S |
| Any: 2021 Clau: Review |
| Revista: Materials |
| País: N/D |
| Títol: Actuator Behaviour of Tailored Poly(thiourethane) Shape Memory Thermosets |
| Autors: Gamardella, Francesco; Serra, Angels; Ramis, Xavier; De la Flor, Silvia; |
| Any: 2021 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Vegetable Oil-Based Thiol-Ene/Thiol-Epoxy Resins for Laser Direct Writing 3D Micro-/Nano-Lithography |
| Autors: Grauzeliene, Sigita; Navaruckiene, Aukse; Skliutas, Edvinas; Malinauskas, Mangirdas; Serra, Angels; Ostrauskaite, Jolita; |
| Any: 2021 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Novel BN-epoxy/anhydride composites with enhanced thermal conductivity |
| Autors: Isarn I; Ferrando F; Serra À; Urbina C |
| Any: 2021 Clau: Article |
| Revista: Polymers For Advanced Technologies |
| País: N/D |
| Títol: Curing kinetics of dually-processed acrylate-epoxy 3D printing resins |
| Autors: Konuray O; Morancho JM; Fernández-Francos X; García-Alvarez M; Ramis X |
| Any: 2021 Clau: Article |
| Revista: Thermochimica Acta |
| País: N/D |
| Títol: Cost-Effectively 3D-Printed Rigid and Versatile Interpenetrating Polymer Networks |
| Autors: Konuray, Osman; Sola, Arnau; Bonada, Jordi; Tercjak, Agnieszka; Fabregat-Sanjuan, Albert; Fernandez-Francos, Xavier; Ramis, Xavier; |
| Any: 2021 Clau: Article |
| Revista: Materials |
| País: N/D |
| Títol: Dual-cured thermosets from glycydil methacrylate obtained by epoxy-amine reaction and methacrylate homopolymerization |
| Autors: Roig, Adria; Ramis, Xavier; De la Flor, Silvia; Serra, Angels; |
| Any: 2021 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Sequential photo-thermal curing of (meth)acrylate-epoxy thiol formulations |
| Autors: Roig, Adria; Ramis, Xavier; De la Flor, Silvia; Serra, Angels; |
| Any: 2021 Clau: Article |
| Revista: Polymer |
| País: N/D |
| Títol: Shape-memory actuators based on dual-curing thiol-acrylate-epoxy thermosets |
| Autors: Russo C; Fernandez-Francos X; De la Flor S |
| Any: 2021 Clau: Article |
| Revista: Express Polymer Letters |
| País: N/D |
| Títol: From Supramolecular Hydrogels to Multifunctional Carriers for Biologically Active Substances |
| Autors: Skopinska-Wisniewska, Joanna; De la Flor, Silvia; Kozlowska, Justyna; |
| Any: 2021 Clau: Review |
| Revista: International Journal Of Molecular Sciences |
| País: N/D |
| Títol: Membranes for cation transport based on dendronized poly(Epichlorohydrin-co-ethylene oxide). part 1: The effect of dendron amount and column orientation on copolymer mobility |
| Autors: Zare A; Pascual-Jose B; De la Flor S; Ribes-Greus A; Montané X; Reina JA; Giamberini M |
| Any: 2021 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Recyclable poly(thiourethane) vitrimers with high Tg. Influence of the isocyanate structure |
| Autors: Gamardella F; De la Flor S; Ramis X; Serra A |
| Any: 2020 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Recyclable organocatalyzed poly(Thiourethane) covalent adaptable networks |
| Autors: Gamardella F; Muñoz S; De la Flor S; Ramis X; Serra A |
| Any: 2020 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Recyclable organocatalyzed poly(Thiourethane) covalent adaptable networks |
| Autors: Gamardella F; Muñoz S; De la Flor S; Ramis X; Serra A |
| Any: 2020 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: A new class of vitrimers based on aliphatic poly(thiourethane) networks with shape memory and permanent shape reconfiguration |
| Autors: Gamardella, Francesco; Guerrero, Federico; De la Flor, Silvia; Ramis, Xavier; Serra, Angels; |
| Any: 2020 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Novel bio-based epoxy thermosets based on triglycidyl phloroglucinol prepared by thiol-epoxy reaction |
| Autors: Guzmán D; Santiago D; Serra à; Ferrando F |
| Any: 2020 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Novel BN-epoxy/anhydride composites with enhanced thermal conductivity |
| Autors: Isarn I; Ferrando F; Serra ÿ; Urbina C |
| Any: 2020 Clau: Article |
| Revista: Polymers For Advanced Technologies |
| País: N/D |
| Títol: Study of the synergistic effect of boron nitride and carbon nanotubes in the improvement of thermal conductivity of epoxy composites |
| Autors: Isarn, Isaac; Bonnaud, Leila; Massagues, Lluis; Serra, Angels; Ferrando, Francesc; |
| Any: 2020 Clau: Article |
| Revista: Polymer International |
| País: N/D |
| Títol: Dual-curable stereolithography resins for superior thermomechanical properties |
| Autors: Konuray O; Di Donato F; Sangermano M; Bonada J; Tercjak A; Fernández-Francos X; Serra ; Ramis X |
| Any: 2020 Clau: Article |
| Revista: Express Polymer Letters |
| País: N/D |
| Títol: The use of click-type reactions in the preparation of thermosets |
| Autors: Konuray O; Fernández-Francos X; De la Flor S; Ramis X; Serra À |
| Any: 2020 Clau: Review |
| Revista: Polymers |
| País: N/D |
| Títol: Curing kinetics of acrylate-based and 3D printable IPNs |
| Autors: Konuray, Osman; Salla, Jose M.; Morancho, Jose M.; Fernandez-Francos, Xavier; Garcia-Alvarez, Montserrat; Ramis, Xavier; |
| Any: 2020 Clau: Article |
| Revista: Thermochimica Acta |
| País: N/D |
| Títol: Dual curing of an epoxy resin with dicarboxylic acids |
| Autors: Morancho JM; Ramis X; Fernández-Francos X; Konuray O; Salla JM; Serra |
| Any: 2020 Clau: Article |
| Revista: Journal Of Thermal Analysis And Calorimetry |
| País: N/D |
| Títol: Optimization of the Production Factors of Boards Obtained from Arundo donax L. Fibers without Added Adhesives |
| Autors: Ramos D., Ferrando F., Farriol X., Salvadó J. |
| Any: 2020 Clau: Article |
| Revista: MOLECULES |
| País: N/D |
| Títol: Optimization of the production factors of boards obtained from Arundo Donax L. Fibers without added adhesives |
| Autors: Ramos D; Ferrando F; Farriol X; Salvadó J |
| Any: 2020 Clau: Article |
| Revista: Molecules |
| País: N/D |
| Títol: Shape-memory actuators based on dual-curing thiol-acrylate-epoxy thermosets |
| Autors: Russo C; Fernandez-Francos X; De la Flor S |
| Any: 2020 Clau: Article |
| Revista: N/D |
| País: N/D |
| Títol: Bio-based epoxy shape-memory thermosets from triglycidyl phloroglucinol |
| Autors: Santiago D; Guzmán D; Ferrando F; Serra À; De la Flor S |
| Any: 2020 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: New epoxy thermosets derived from clove oil prepared by epoxy-amine curing |
| Autors: Santiago D; Guzmán D; Ramis X; Ferrando F; Serra À |
| Any: 2020 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Performance of Flexible Chemoresistive Gas Sensors after Having Undergone Automated Bending Tests |
| Autors: Alvarado M, La Flor S, Llobet E, Romero A, Ramírez JL. |
| Any: 2019 Clau: Article |
| Revista: Sensors |
| País: N/D |
| Títol: Testing the Reliability of Flexible MOX Gas Sensors under Strain |
| Autors: Alvarado, M.; Romero, A.; Ramírez, J.L.; Flor, SDe la; Llobet, E. |
| Any: 2019 Clau: Article |
| Revista: Proceedings |
| País: N/D |
| Títol: Dielectric spectroscopy of novel thiol-ene/epoxy thermosets obtained from allyl-modified hyperbranched poly(ethyleneimine) and diglycidylether of bisphenol A |
| Autors: Badia JD; Teruel-Juanes R; Acebo C; Gil-Castell O; Serra A; Ribes-Greus A |
| Any: 2019 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Synthesis and thermophysical characterization of fatty amides for thermal energy storage |
| Autors: Canela-Xandri A; Villorbina G; Balcells M; Fernández-Francos X; Cabeza LF; Canela-Garayoa R |
| Any: 2019 Clau: Article |
| Revista: Molecules |
| País: N/D |
| Títol: Preparation of poly(thiourethane) thermosets by controlled thiol-isocyanate click reaction using a latent organocatalyst |
| Autors: Gamardella F, Ramis X, De la Flor S, Serra À |
| Any: 2019 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Tailor-made thermosets obtained by sequential dual-curing combining isocyanate-thiol and epoxy-thiol click reactions |
| Autors: Gamardella, Francesco; Sabatini, Valentina; Ramis, Xavier; Serra, Angels |
| Any: 2019 Clau: Article |
| Revista: Polymer |
| País: N/D |
| Títol: Fully renewable thermosets based on bis-eugenol prepared by thiol-click chemistry |
| Autors: Guzmán D, Serra A, Ramis X, Fernández-Francos X, De la Flor S |
| Any: 2019 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Thermal conductive composites prepared by addition of several ceramic fillers to thermally cationic curing cycloaliphatic epoxy resins |
| Autors: Isarn I, Gamardella F, Fernàndez-Francos X, Serra À, Ferrando F |
| Any: 2019 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Enhancement of thermal conductivity in epoxy coatings through the combined addition of expanded graphite and boron nitride fillers |
| Autors: Isarn, Isaac; Bonnaud, Leila; Massagues, Lluis; Serra, Angels; Ferrando, Francesc |
| Any: 2019 Clau: Article |
| Revista: Progress In Organic Coatings |
| País: N/D |
| Títol: Dielectric spectroscpy of novel thiol-ene/epoxy thermosets obtained from allyl-modified hyperbranched poly(ethyleneimine) and diglycidylether of bisphenol A |
| Autors: José David Badia; Roberto Teruel-Juanes; Cristina Acebo; Oscar Gil-Castell; Angels Serra; Amparo Ribes-Greus |
| Any: 2019 Clau: Article |
| Revista: EUROPEAN POLYMER JOURNAL |
| País: N/D |
| Títol: Acetoacetate based thermosets prepared by dual-Michael addition reactions |
| Autors: Konuray O; Fernández-Francos X; Ramis X; Serra Á |
| Any: 2019 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Time-temperature-transformation (TTT) diagram of dual-curable epoxy thermosets obtained via two sequential epoxy-amine condensations |
| Autors: Konuray O; Salla JM; Morancho JM; Fernández-Francos X; García-Alvarez M; Ramis X |
| Any: 2019 Clau: Article |
| Revista: Thermochimica Acta |
| País: N/D |
| Títol: Hard epoxy thermosets obtained via two sequential epoxy-amine condensation |
| Autors: Konuray, Osman; Garcia, Aina; Morancho, Jose M.; Fernandez-Francos, Xavier; Serra, Angels; Ferrando, Francesc; Garcia-Alvarez, Montserrat; Ramis, Xavier |
| Any: 2019 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Curing and thermomechanical properties of off-stoichiometric anhydride-epoxy thermosets |
| Autors: Morancho J, Ramis X, Fernández-Francos X, Salla J, Konuray O, Serra |
| Any: 2019 Clau: Article |
| Revista: Journal Of Thermal Analysis And Calorimetry |
| País: N/D |
| Títol: Sequential heat release: an innovative approach for the control of curing profiles during composite processing based on dual-curing systems |
| Autors: Romero, Maria; Fernandez-Francos, Xavier; Ramis, Xavier; |
| Any: 2019 Clau: Article |
| Revista: Polymer International |
| País: N/D |
| Títol: Characterization of sequential dual-curing of thiol-acrylate-epoxy systems with controlled thermal properties |
| Autors: Russo C, Serra À, Fernández-Francos X, De la Flor S |
| Any: 2019 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: Rheological and mechanical characterization of dual-curing thiol-acrylate-epoxy thermosets for advanced applications |
| Autors: Russo C; Fernández-Francos X; De la Flor S |
| Any: 2019 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Kinetics analysis and simulation of sequential epoxy dual-curing systems with independent thermal activation |
| Autors: Santin, David; Konuray, Osman; Fernandez-Francos, Xavier; Ramis, Xavier; |
| Any: 2019 Clau: Article |
| Revista: Thermochimica Acta |
| País: N/D |
| Títol: Detecting NiTi two-way shape memory effect based on microstructural and macromechanical parameters |
| Autors: Urbina C, Gispert F, Ferrando F, De la Flor S |
| Any: 2019 Clau: Article |
| Revista: Materials Science And Technology |
| País: N/D |
| Títol: Time-temperature-transformation (TTT) diagram of a dual-curable off-stoichiometric epoxy-amine system with latent reactivity |
| Autors: Areny, Nuria; Konuray, Osman; Fernandez-Francos, Xavier; Salla, Josep M.; Morancho, Josep M.; Ramis, Xavier; |
| Any: 2018 Clau: Article |
| Revista: Thermochimica Acta |
| País: N/D |
| Títol: Motion control in free-standing shape-memory actuators |
| Autors: Belmonte A., Lama G., Cerruti P., Ambrogi V., Fernández-Francos X., De La Flor S. |
| Any: 2018 Clau: Article |
| Revista: SMART MATERIALS AND STRUCTURES |
| País: N/D |
| Títol: Motion control in free-standing shape-memory actuators |
| Autors: Belmonte A; Lama G; Cerruti P; Ambrogi V; Fernández-Francos X; De La Flor S |
| Any: 2018 Clau: Article |
| Revista: Smart Materials And Structures |
| País: N/D |
| Títol: Optimisation procedure for additive manufacturing processes based on mask image projection to improve Z accuracy and resolution |
| Autors: Bonada, J.; Muguruza, A.; Fernandez-Francos, X.; Ramis, X.; |
| Any: 2018 Clau: Article |
| Revista: Journal Of Manufacturing Processes |
| País: N/D |
| Títol: Improving students¿ engagement and performance through new e-learning tools in laboratory subjects in mechanical engineering |
| Autors: De La Flor S; Belmonte A; Fabregat-Sanjuan A |
| Any: 2018 Clau: Article |
| Revista: International Journal Of Engineering Education |
| País: N/D |
| Títol: Improving Students' Engagement and Performance Through New e-Learning Tools in Laboratory Subjects in Mechanical Engineering |
| Autors: De La Flor, Silvia; Belmonte, Alberto; Fabregat-Sanjuan, Albert; |
| Any: 2018 Clau: Article |
| Revista: International Journal Of Engineering Education |
| País: N/D |
| Títol: Thermal and mechanical characterization of EMA-TEGDMA mixtures for cosmetic applications |
| Autors: Donoso R, Reina JA, Giamberini M, De La Flor S, Ferrando F, Cerruti P. |
| Any: 2018 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Identifying the effects of heat treatment temperatures on the Ti50Ni45Cu5alloy using dynamic mechanical analysis combined with microstructural analysis |
| Autors: Fabregat-Sanjuan A., Gispert-Guirado F., Ferrando F., De la Flor S. |
| Any: 2018 Clau: Article |
| Revista: MATERIALS SCIENCE & ENGINEERING A: STRUCTURAL MATERIALS: PROPERTIES, MICROSTRUCTURE AND PROCESSING |
| País: N/D |
| Títol: Identifying the effects of heat treatment temperatures on the Ti50Ni45Cu5 alloy using dynamic mechanical analysis combined with microstructural analysis |
| Autors: Fabregat-Sanjuan A; Gispert-Guirado F; Ferrando F; De la Flor S |
| Any: 2018 Clau: Article |
| Revista: Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing |
| País: N/D |
| Títol: Polylactide-based self-reinforced composites biodegradation: Individual and combined influence of temperature, water and compost |
| Autors: Gil-Castell O., Badia J.D., Ingles-Mascaros S., Teruel-Juanes R., Serra A., Ribes-Greus A. |
| Any: 2018 Clau: Article |
| Revista: Polymer Degradation And Stability |
| País: N/D |
| Títol: In vitro validation of biomedical polyester-based scaffolds: Poly(lactide-co-glycolide) as model-case |
| Autors: Gil-Castell O., Badia J.D., Ontoria-Oviedo I., Castellano D., Marco B., Rabal A., Bou J.J., Serra A., Monreal L., Blanes M., Sepúlveda P., Ribes-Greus A. |
| Any: 2018 Clau: Article |
| Revista: Polymer Testing |
| País: N/D |
| Títol: Preparation of new biobased materials from a triglycidyl eugenol derivative through thiol-epoxy click reaction |
| Autors: Guzmán D., Ramis X., Fernández-Francos X., De la Flor S., Serra A. |
| Any: 2018 Clau: Article |
| Revista: Progress In Organic Coatings |
| País: N/D |
| Títol: Thermoconductive Thermosetting Composites Based on Boron Nitride Fillers and Thiol-Epoxy Matrices |
| Autors: Isarn I, Ramis X, Ferrando F, Serra A |
| Any: 2018 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: New epoxy composite thermosets with enhanced thermal conductivity and high Tg obtained by cationic homopolymerization |
| Autors: Isarn I., Gamardella F., Massagués L., Fernàndez-Francos X., Serra À., Ferrando F. |
| Any: 2018 Clau: Article |
| Revista: Polymer Composites |
| País: N/D |
| Títol: Curing of off-stoichiometric amine-epoxy thermosets |
| Autors: J.M. Morancho; X. Ramis; J.M. Salla; X. Fernández-Francos; O. Konuray;A. Serra |
| Any: 2018 Clau: Article |
| Revista: Journal Of Thermal Analysis And Calorimetry |
| País: N/D |
| Títol: Effect of Selected Thiols on Cross-linking of Acrylated Epoxidized Soybean Oil and Properties of Resulting Polymers |
| Autors: Kasetaite S, De la Flor S, Serra A, Ostrauskaite J. |
| Any: 2018 Clau: Article |
| Revista: Polymers |
| País: N/D |
| Títol: Sequential dual curing by selective Michael addition and free radical polymerization of acetoacetate-acrylate-methacrylate mixtures |
| Autors: Konuray A., Ruiz A., Morancho J., Salla J., Fernández-Francos X., Serra À., Ramis X. |
| Any: 2018 Clau: Article |
| Revista: European Polymer Journal |
| País: N/D |
| Títol: State of the art in dual-curing acrylate systems |
| Autors: Konuray O, Fernández-Francos X, Ramis X, Serra À. |
| Any: 2018 Clau: Review |
| Revista: Polymers |
| País: N/D |
| Títol: Preparation and characterization of dual-curable off-stoichiometric amine-epoxy thermosets with latent reactivity |
| Autors: Konuray O., Areny N., Morancho J., Fernández-Francos X., Serra À., Ramis X. |
| Any: 2018 Clau: Article |
| Revista: Polymer |
| País: N/D |
| Títol: New allyl-functional catalytic comonomers for sequential thiol- Michael and radical thiol-ene reactions |
| Autors: Konuray O., Fernández-Francos X., Ramis X., Serra À. |
| Any: 2018 Clau: Article |
| Revista: Polymer |
| País: N/D |
| Títol: Curing kinetics and characterization of dual-curable thiol-acrylate-epoxy thermosets with latent reactivity |
| Autors: Konuray, Ali Osman; Fernandez-Francos, Xavier; Ramis, Xavier; |
| Any: 2018 Clau: Article |
| Revista: Reactive & Functional Polymers |
| País: N/D |
| Títol: Curing of off-stoichiometric amine¿epoxy thermosets |
| Autors: Morancho J; Ramis X; Fernández-Francos X; Salla J; Konuray A; Serra |
| Any: 2018 Clau: Article |
| Revista: Journal Of Thermal Analysis And Calorimetry |
| País: N/D |
| Llibres / Books |
| 2018 | 2019 | 2020 | 2021 | 2022 |
|---|
| Títol: XV Años de proyecto Integrador en los estudios de Ingeniería mecánica |
| Autors: Francesc Ferrando, Diego ramos, Cristina Urbina, Albert Fabregat |
| Any: 2019 Clau: Books |
| Capítols de Llibre / Book chapters |
| 2018 | 2019 | 2020 | 2021 | 2022 |
|---|
| Títol: Toward the recyclability of thermosetting polymers |
| Autors: Gamardella F; De la Flor S; Ramis X; Serra À |
| Any: 2022 Clau: Book Chapters |
| Títol: Characterization of dual-curing thiol-acrylate-epoxy thermosets with tailorable intermediate and final properties |
| Autors: Claudio Russo; Àngels Serra i Albet; Xavier Fernández Francos; Silvia de la Flor López |
| Any: 2019 Clau: Book Chapters |
| Títol: Thermosetting Materials From Eugenol Derivatives |
| Autors: Guzmán D; Serra A; Ramis X |
| Any: 2019 Clau: Book Chapters |
| Títol: Click-based dual-curing thermosets and their applications |
| Autors: Ramis X; Fernández-Francos X; De la Flor S; Ferrando F; Serra A |
| Any: 2018 Clau: Book Chapters |
| Títol: Click-based dual-curing thermosets and their applications (Chapter 16) |
| Autors: Ramis, X., Fernández-Francos, X., De la Flor, S., Ferrando, F., Serra, À. |
| Any: 2018 Clau: Book Chapters |
| Altres Documents / Other documents |
| 2018 | 2019 | 2020 | 2021 | 2022 |
|---|
| Patents Sol.licitades / Patents |
| 2018 | 2019 | 2020 | 2021 | 2022 |
|---|
| Títol: METHOD AND SYSTEM FOR GUIDING ELECTRODE PLACEMENT ON THE SCALP |
| Autors: FABREGAT SANJUAN, ALBERT (Autor o Coautor); PASCUAL RUBIO, VICENÇ (Autor o Coautor) |
| Any: 2021 Tipus: Patent |
| Organismes: N/D |
| Països: N/D |
| Títol: AN ELECTRODE DEVICE FOR AMPLITUDE-INTEGRATED ELECTROENCEPHALOGRAPHY |
| Autors: FABREGAT SANJUAN, ALBERT (Autor o Coautor); PASCUAL RUBIO, VICENÇ (Autor o Coautor) |
| Any: 2020 Tipus: Patent |
| Organismes: N/D |
| Països: N/D |
| Congressos / Conferences |
| 2018 | 2019 | 2020 | 2021 | 2022 |
|---|
| Autor/a: Albert Fabregat-Sanjuan, Rosa Pàmies-Vilà, María Verdú, Cristina Urbina Pons, Francisco Huera-Huarte, Francesc Ferrando-Piera |
| Títol: Anàlisi de les qualificacions obtingudes amb una estrategia docent ludificada |
| Congrés/acte: Cidui 2020+1 |
| Congrés/acte: Speaker |
| Any: 2021 |
| Autor/a: Albert Fabregat-Sanjuan, Rosa Pàmies-Vilà, María Verdú, Cristina Urbina Pons, Francisco Huera-Huarte, Francesc Ferrando-Piera |
| Títol: Análisis de las calificaciones en actividades ludificadas |
| Congrés/acte: Anales De Ingenieria Mecanica |
| Congrés/acte: Speaker |
| Any: 2021 |
| Autor/a: Albert Fabregat-Sanjuan, Xavier Fernández-Francos, Francesc Ferrando-Piera |
| Títol: Análisis del curado dual en resinas epoxi mediante un molde instrumentado |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2021 |
| Autor/a: Albert Fabregat-Sanjuan, Xavier Fernández-Francos, Francesc Ferrando-Piera |
| Títol: Diseño e instrumentación de un molde para el análisis del curado dual en resinas epoxi |
| Congrés/acte: Actualidad De La Ingeniería Mecànica En Iberoamérica |
| Congrés/acte: Paper |
| Any: 2019 |
| Autor/a: Cristina Urbina, Albert Fabregat, Marcos Sanchez |
| Títol: Gamification and Agile: An Alternative Approach to Learn Mechanics |
| Congrés/acte: International Conference The Future Of Education |
| Congrés/acte: Speaker |
| Any: 2019 |
| Autor/a: Isaac Isarn; Leïla Bonnaud; Lluís Massagués; Àngels Serra; Francesc Ferrando. |
| Títol: Enhancement of thermal conductivity in epoxy composites through the addition of expanded graphite and boron nitride fillers |
| Congrés/acte: Actes Del Congrès |
| Congrés/acte: Poster |
| Any: 2019 |
| Autor/a: A. Belmonte, G. Lama, P.F. Cerruti, V. Ambrogi, X. Fernández-Francos, S. De la Flor. |
| Títol: Controlled actuation in thermally-triggered free-standing shape-memory actuators |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2018 |
| Autor/a: A. Belmonte, X. Fernández, S. De la Flor. |
| Títol: Diseño avanzado de materiales termoestables funcionales mediante técnicas de curado dualsecuencial: aplicación para la fabricación de polímeros con memoria de forma |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2018 |
| Autor/a: A. Fabregat, R. Pàmies, S. De la Flor, F. Ferrando |
| Títol: Análisis de la retroalimentación gamificada en tiempo real. Caso práctico en asignaturas de ingeniería mecánica |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2018 |
| Autor/a: A. SERRA, X. FERNÁNDEZ-FRANCOS, N. ARENY, O. KONURAY, X. RAMIS. |
| Títol: Sequential Dual Curing: Versatility in processing and thermosets characteristics |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: A. Serra, X. Fernández-Francos, O. Konuray, S. De la Flor, X. Ramis. |
| Títol: Sequential Dual Curing Processes for Epoxy and Acrylate Formulations |
| Congrés/acte: N/D |
| Congrés/acte: Paper |
| Any: 2018 |
| Autor/a: Albert Fabregat-Sanjuan; Rosa Pàmies-Vilà; Silvia De la Flor; Francesc Ferrando Piera |
| Títol: Análisis de la retroalimentación gamificada en tiempo real. Caso práctico en asignaturas de ingeniería mecánica |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2018 |
| Autor/a: Claudio Russo, Angels Serra, Xavier Fernández-Francos, Silvia De la Flor. |
| Títol: Characterization of sequential dual-curing of thiol-acrylate-epoxy systems with controlled thermal properties |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: Claudio Russo; Àngels Serra; Xavier Fernández-Francos; Silvia De la Flor. |
| Títol: Characterization of sequential dual-curing of thiol-acrylate-epoxy systems with controlled thermal properties |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: D. Guzmán, A. Serra, S. de la Flor, X. Ramis, X. Fernández-Francos |
| Títol: New epoxy thermosets derived from clove oil prepared by thiol-epoxy curing |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: Dailyn Guzmán; Àngels Serra; Silvia De la Flor; Xavier Ramis, Xavier Fernández-Francos. |
| Títol: New epoxy thermosets derived from clove oil prepared by thiol-epoxy curing |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: Diego Ramos; Joan Salvadó; Francesc Ferrando |
| Títol: Características físicas y mecánicas de Tableros obtenidos a partir de fibras de 'Arundo donax L.' |
| Congrés/acte: N/D |
| Congrés/acte: Paper |
| Any: 2018 |
| Autor/a: F. Gamardella, X. Ramis, S. De la Flor, A. Serra |
| Títol: Polythiourethane networks obtained by controlled thiol-isocyanate click reaction |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: Francesco Gamardella; Xavier Ramis.; Silvia De la Flor; Angels Serra, |
| Títol: Polythiourethane networks obtained by controlled thiol-isocyanate click reaction |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: Isaac Isarn; Francesco Gamardella; Angels Serra; Francesc Ferrando. |
| Títol: Mejora de la Conductividad Térmica de Resinas Epoxídicas |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: J.M. MORANCHO, X. RAMIS, X. FERNÁNDEZ-FRANCOS, J.M. SALLA, A. O. KONURAY, A. SERRA |
| Títol: Curing and mechanical properties of off-stoichiometric anhydride-epoxy thermosets |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: José David Badia; Cristina Acebo; Roberto Teruel-Juanes; Oscar Gil-Castell; Àngels Serra; Amparo Ribes-Greus. |
| Títol: Dielectric segmental dynamics of thermal-photo curable thiol-ene/thiol-epoxy thermosets |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: Pàmies-Vilà, Rosa; Fabregat-Sanjuan, Albert; Puig-Ortiz, Joan; Jordi, Lluïsa; Hernandez Fernandez, Antoni |
| Títol: Ús de Kahoot! com a eina de ludificació per a la retroalimentació a temps. |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2018 |
| Autor/a: S. De la Flor, A. Belmonte, C. Guimaraes, V. Lorenzo, X. Fernández-Francos |
| Títol: Análisis del efecto del envejecimiento en las propiedades mecánicas de polímeros con memoria de forma mediante técnicas de microdureza instrumentada |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2018 |
| Autor/a: SERRA ALBET, MARIA ANGELS |
| Títol: Sequential Dual Curing Processes for Epoxy and Acrylate Formulations |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2018 |
| Autor/a: Silvia De la Flor, Alberto Belmonte, Vicente Lorenzo, Xavier Fernández-Francos |
| Títol: Effect of crosslinking and long-term storage on thiol-epoxy shape memory polymers by means of Depth Sensing Indentation methods |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2018 |
| Autor/a: Silvia De la Flor, Diego Ramos, Francesc Ferrando, Xavier Zamora, Luis López de Zamora |
| Títol: Project based learning methodology to promote essential skills in mechanical engineers. A case of study in structural mechanics |
| Congrés/acte: N/D |
| Congrés/acte: Poster |
| Any: 2018 |
| Autor/a: Silvia De la Flor, Diego Ramos, Francesc Ferrando, Xavier Zamora, Luis López de Zamora |
| Títol: Project-Based Learning Methodology to Promote Essential Skills in Mechanical Engineers. A Case of Study in Structural Mechanics |
| Congrés/acte: N/D |
| Congrés/acte: Speaker |
| Any: 2018 |
